LG-Ericsson LIP-9070, Руководство пользователя

Страница: 121 / 197

INTERNAL
LIP-9070 User guide 03/09/2013
Page 121of
13.2.1.2 Leaving a Message Wait
If the called user does not answer or is in DND mode, you may leave a Message Wait. The called
user will receive a Message Wait indication; the message icon will be displayed. If the Ring/Message
LED is set to Message Wait, the LED will flash.
13.2.2 External Calls
13.2.2.1 Placing external CO/VoIP calls
External calls are placed on CO/IP lines. These ‘lines’ are accessed either using a button on the
iPECS Phone assigned as a CO/IP line or using dial codes. The CO/IP lines are grouped for
different types of calls, local, long distance, etc. Using the CO/IP line group code, you will be able to
access any line from the group. A Flex button on the iPECS Phone assigned as a
LOOP
button lets
you access a line from a group. Dial codes for access to CO/IP lines are:
Individual CO/IP line access
88 + Line number (01-42 for iPECS-50 & 100, 001-200 for iPECS-300, 001-400 for iPECS-600, or
001-600 for iPECS-1200).
CO/IP Group access
—
801-820 for iPECS-50 & 100, 801-872 for iPECS-300 & 600, or 8001-8200 for iPECS-1200.
Any CO/IP Line access
—
9
When dialing on a CO line which uses pulse style signals, you may activate Dial Pulse to Tone
Switchover changing to DTMF style dialing (for banking services, etc.).
When placing an IP call, you must dial an IP address using the ‘*’ key in place of the dot.
If Least Cost Routing is set-up, the number you dial will be analyzed and the system will place the call
on the least expensive route.
You may be assigned Dialing and/or CO/IP Line Access Restrictions, in which case you will receive
error tone if you attempt to dial or access a restricted number/CO/IP line. CO/IP line and Station
Class Of Service (COS), which establish dialing restrictions, may vary during Day and Night operation
(Day/Night COS).
You may need to enter an Authorization code before placing calls, in which case you will receive a
second dial tone.
Your external calls may be subject to Call Time Restrictions, you will receive a Call Warning Tone
prior to disconnect.
NOTE
—In the event of an emergency, assigned Emergency numbers (ex., a 911 call) may be dialed
from any station in the System, regardless of a Station’s dialing restrictions (COS).
13.2.2.2 Waiting for the next available CO/IP line
If all the lines connected to your system are busy, you will receive an All Trunks Busy signal. You
may request to be notified when a line is available for use.
To activate Message Waiting:

When calling a number that is busy or in DND mode, press the
CALL BACK button and hang-up.
To place an external call:

Lift the handset,

Dial the CO/IP line/group,

Dial the desired number.