LG-Ericsson GDC- 480H Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 70

background image

GDC-480H/500H Wireless Handset

User Guide

11

2.5 Installing the Belt Clip

The GDC-480H/500H comes with a belt clip that can be installed on the unit. To install the
belt clip, refer to the figure and instructions below.

When installing the belt clip:

1. Turn the screw clockwise on the back of the unit.
2. The belt clip is pulled upward until the screw is inserted into the hole securely.

When uninstalling the belt clip:

1. The belt clip is pulled down with pushing the button of the belt clip until the lock is

open.

2.6 Installation of Wireless Terminal

Before using the GDC-480H/500H, the wireless terminal must be subscribed to a System.
The subscription process must be conducted at the User Station, and at the Attendant
Station to ensure proper function of the wireless terminal. Proper Authorization Codes should
be obtained from the System Administrator or the Attendant before processing the
subscription (refer to Subscribing the GDC-480H/500H to a System).

The wireless terminal is allowed to be subscribed to up to 4 GAP systems. If a user wants to

subscribe to more than 4 systems, the wireless terminal first should be unsubscribed from
one of the systems. This subscription procedure can be performed by a User. There are two
methods to unsubscribe the wireless terminal from the key system:



The User can unsubscribe from the system and the wireless terminal at the same time

(details described in Terminating a Subscription

.



The second method is to unsubscribe locally in the system or at the wireless terminal

separately.

Warning

If a user terminates their subscription at their terminal, the Attendant should be

notified so terminal information can be deleted from the System.

«
...
18
19
20
21
22
...
»

Содержание GDC- 480H







































































Отзывы:

Нет отзывов

Похожие инструкции для GDC- 480H

Бренд: Wiko Страницы: 56

Бренд: TCT Mobile Страницы: 64

Бренд: T-Mobile Страницы: 212

One Touch 903 Smart

Бренд: Alcatel Страницы: 21

Бренд: iBall Страницы: 150

Бренд: PCD Страницы: 73

Бренд: i-mobile Страницы: 64

Бренд: STK Professional Audio Страницы: 13

Бренд: Samsung Страницы: 126

Бренд: Samsung Страницы: 119

SIP DECT Series

Бренд: Teledex Страницы: 1

Бренд: Zte Страницы: 99

Бренд: Overmax Страницы: 126

Бренд: Nokia Страницы: 161

Бренд: Philips Страницы: 7

Бренд: Philips Страницы: 14

Бренд: Philips Страницы: 40

Бренд: Philips Страницы: 92

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды