Leyman TLS3510RL Hide-A-Way, Руководство по установке

Страница: 21 / 28

21
OPERATING INSTRUCTIONS
Before operating the lift gate, read and understand this manual and all urgent warning decals.
Do not stand in front of the lift gate while unfolding or using the platform.
With the gate in the over-the-road (stored) position, proceed with the following steps:
1.
To relieve the tension on the auto lock, push the up switch (the gate will go up), pull the handle
to release the auto lock.
2. Use the down switch to lower the lift until arms are parallel to the ground.
3. Stand to the side of the lift gate. Push the power in/out switch down. Gate will run out. Run
the gate out until it stops and locks into its fully extended position.
4. Unfold the ramp.
To lower the platform, use the down switch only.
To raise the platform, use the up switch only.
To store the gate in the over-the-road (stored) position:
1.
Raise the platform off the ground until the arms are parallel to the ground.
2. Fold ramp over.
3. Raise locking bar handle and push the in/out switch upward. Run the gate all the way under
the trailer until the lift stops.
4. Run gate up (use the up switch). The auto lock will latch.
5. Lower the gate using the down switch only until resting on the auto lock.