40
GA 12.137/2.02 - 05/2002
EC Conformance Declaration
We, the Leybold Vacuum GmbH, declare herewith that
the products listed below, on the basis of their design
and engineering as well as in the embodiment which we
have placed on the market, comply with the applicable
safety and health requirements set forth in EC guideli-
nes.
This declaration becomes invalid if modifications are
made to the product without consultation with us.
When operating with pressurised components like heli-
um flexlines, gas manifolds, cold heads or cryo pumps,
compliance with the fundamental safety requirements as
laid down through EC directives is mandatory. This inclu-
des attentive reading and observation of all Operating
Instructions of the system components used.
The protection aims of the EMC Guideline can only be
attained when properly using Leybold components like
cold head, cryo pump, controllers and cables.
Designation of the products: Helium compressor unit
Model: COOLPAK 6000-1
Catalog number: 892 35
Conformity assessment procedures in accordance to
EC Pressure Equipment Directive:
Assembly compressor unit
Module A
- Separator
Module A
- Adsorber
Module A
- Safety valve
Module B
The products comply with the following guidelines:
•
EC Machinery Guidelines (89/392/EEC)
in the 91/368/EEC version
•
EC Low-Voltage Guidelines (73/23/EEC)
•
EEC Directive on Elektromagnetic Compatibility
(89/336/EWG), measured with a typical test
configuration
•
EC Pressure Equipment Directive (97/23/EG)
Applicable, harmonized standards:
•
EN 292-1 and -2
Machinery Safety – Basic Terminology
•
EN 1012-1
Safety Requirements for Compressors
•
EN 60204-1
Electrical Equipment for Industrial Machinery
•
EN 50081-1: EMC, Generic Emission Std
•
EN 50082-2: EMC, Generic Immunity Std
Applied national standards and technical
specifications:
•
VBG 16/01.93 Compressors
•
VBG 4/04.79 Electrical Operating Machinery
and Plant
•
DIN VDE 0113- Electrical Equipment
•
AD-2000 Rulings A2, B0, HP30 W0
•
DK 621.642-986 Pressurized Vessels Code
•
GSG, Section 3, Par. 1, Equipment Safety Code
Cologne, May 29, 2002
—————————————————————
Dr. Mattern-Klosson, Managing Director
Cologne, May 29, 2002
—————————————————————
Dr. Häfner, Head of Cryogenics Design
