LEYBOLD 230680V01, Руководство по эксплуатации

Страница: 9 / 20

GA300553102_002_C2
– 04/2017
9
4.3 Controls
The GRAPHIX controller is operated through the buttons displayed through the graphic TFT
touch display. Since this is a resistive type of touchpanel, entries are possible even when
using gloves.
Main Menu Buttons
Pressing the touchscreen for a duration of approximately 1 second displays the main menu
(

Figure 2 and Figure 3, page 9). You can also use the display mode selection window.
Here you may access different parameters and instrument functions. These have been
arranged by way of parameter groups within which you can view or change the
corresponding parameters or enable functions. In this way you may configure your
GRAPHIX controller and also utilise further functions offered by the instrument.
Channel Menu Buttons
Briefly touching the desired channel invokes the channel menu (

Figure 4, page 9) of
the respective channel. Here you can control the sensor connected to the respective
channel. The available setup options depend on the connected type of sensor. Moreover,
you can change in the channel menu the display mode from measured values to graphic.
Figure 2
–
Main Menu 1/2
Figure 3
–
Main Menu 2/2
Figure 4
–
Channel Menu (example)
•
To select, tap the centre of the buttons or symbols.
NOTICE:
The touchscreen is capable of processing only one input signal at a time. It is
not permissible to simultaneously tap the touchscreen at several points since
then no defined control will be possible.