Ethernet IP
10
300802431_002_C0 - 09/2019 - © Leybold
3
Ethernet IP
3.1 LED Status indicators
Name
Indication
Operating Status
Remarks
Color
Status
MS
–
OFF
Power supply OFF
Power is not being supplied to the drive
Green
ON
Option operating
The option is operating normally
Green
Flashing
Option initializing
The option is configuring an IP address
Red
ON
Fatal error occurred
The option has detected a fatal (unrecoverable)
error
Red
Flashing
Non-fatal error occurred
The option has detected a non-fatal (recoverable)
error
Green/Red
Flashing
Option self-test
The option is in self-test mode
NS
–
OFF
Offline or Power supply OFF
–
Green
ON
Online communications established The option is online and has established connec-
tions
Green
Flashing
Online communications not estab-
lished
The option is online without an established con-
nection
Red
ON
Communications error (fatal)
The option detected a duplicate IP address
Red
Flashing
Communications time-out (non-
fatal)
A communications time-out occurred
Green/Red
Flashing
Option self-test
The option is in self-test mode
10/100
Green
OFF
10 Mbps is established
–
Green
ON
100 Mbps is established
LINK/ACT
Green
OFF
Link is not established
Green
ON
Link is established
Green
Flashing
Link is established and there is net-
work activity
Power-Up Diagnostics
An LED test is performed each time the drive is powered up. The initial boot
sequence may take several seconds. After the LEDs have completed the dia-
gnostic LED sequence, the option is successfully initialized. The LEDs then
assume operational conditions as shown in the Table above.
