DRIVING POSITION MEMORY SYSTEM*
a) With the “ENGINE” switch in the “IG-ON” mode and the
shift lever in the “P” position, check the operation:
1. Adjust the driver’s seat and outside rearview mirrors
to the desired positions.
2. While pressing the “SET” button, press down the
button “1,” “2” or “3” until a beep is heard.
3. Check all buttons (1, 2 and 3) to make sure that all
memorized settings operate correctly.
b) With the shift lever in the “P” position, close the driver’s
door and turn the “ENGINE” switch to “IG-ON” mode.
1. Register a driving position to the button “1,” “2” or “3.”
2. Do not carry more than one key (including a card
key*) when registering. While pressing the button “1,”
“2” or “3,” press the driver’s door lock switch (either
lock or unlock switch) until a signal beeps.
3. Unlock the driver’s door using the entry function or
wireless remote control, open the driver’s door, and
check that the stored driving position is recalled.
* If equipped
14
RC350/RCF
INSPECTION DETAILS - C. LEFT FRONT
