manualshive.com logo in svg

Lexus GS300, Руководство пользователя

Поделиться
Скачать
Lexus GS300 Скачать руководство пользователя страница 504

IN CASE OF AN EMERGENCY

483

From rear

G40016

Two−wheel drive models

Select the engine switch in “ACC” mode.

NOTICE

Do not tow in “OFF” mode, as the steering lock
mechanism is not strong enough to hold the front
wheels straight.

When lifting wheels, take care to ensure adequate
ground clearance for towing at the opposite end of
the raised vehicle.  Otherwise, the bumper and/or
underbody of the towed vehicle will be damaged
during towing.

G40017

Four−wheel drive models

Use a towing dolly under the front wheels.

NOTICE

Never tow a vehicle with an automatic transmission
from the rear with front wheels on the ground, as this
may cause serious damage to the transmission.

Содержание GS300















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды