manualshive.com logo in svg

Lexus GS300, Руководство пользователя

Поделиться
Скачать
Lexus GS300 Скачать руководство пользователя страница 467

STARTING AND DRIVING

446

Adaptive variable suspension control (GS430
only)

When the pre−collision sensor detects an object or
vehicle with which your vehicle may collide, and
determines that a collision may be unavoidable, the
adaptive variable suspension adjusts the damping effect
on the shock absorbers and regulates the vehicle not to
pitch forward so much.

The adaptive variable suspension will operate in the following
conditions:

When the vehicle speed is about 5 km/h (3 mph) or over.

When the approaching speed in regard to the object or the
vehicle exceeds about 30 km/h (18 mph).

Pre−collision system failure warning

G31079

Pre−collision system warning light

The light warns that there is a problem somewhere in the
pre−collision system.

The light comes on when the engine switch is selected in
“IG

−

ON” mode.  If the system works properly, the light goes off

after a few seconds.

If the light does not come on when the engine switch is selected
in “IG

−

ON” mode, have your vehicle checked by your Lexus

dealer.

If the system has a problem, the pre

−

collision system warning

light comes on or blinks.  At this time, the master warning light
comes on, a warning tone sounds, and either of the following
messages appears on the multi

−

information display.

PCS DISABLED NOW

CHECK PCS

Содержание GS300















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды