manualshive.com logo in svg

Lexus GS300, Руководство пользователя

Поделиться
Скачать
Lexus GS300 Скачать руководство пользователя страница 456

STARTING AND DRIVING

435

CAUTION

If the low tire pressure warning light comes on, take
your vehicle to the nearest Lexus dealer or authorized
tire dealer or gas station as soon as possible, observing
the following instructions:

Decelerate as soon as possible to the most
appropriate speed that conditions permit.  Do not
drive over 90 km/h (55 mph).

Avoid abrupt steering wheel maneuvering and
braking. If the vehicle tires deteriorate, you could
lose control of the steering wheel or the brakes,
causing death or serious injury.

The warning system may not activate immediately if
bursts or sudden air leakage should occur.

When the tyre pressure warning system warning light is
lit, one or more of your tyres is significantly
under−inflated.  You should stop and check your tyres
as soon as possible, and inflate them to the proper
pressure as indicated on the vehicle’s tyre information
placard.  Driving on a significantly under−inflated tire
causes the tyre to overheat and can lead to tyre failure.
Under−inflation also reduces fuel efficiency and tyre
tread life, and may affect the vehicle’s handling and
stopping ability.  Each tyre, including the spare, should
be checked monthly when cold and set to the
recommended inflation pressure as specified in the
vehicle placard and owner’s manual.

NOTICE

Do not use liquid sealants for a flat tire as tire
pressure sensors will be damaged.

Take due care not to go over a curb stone and be
careful of the holes in the road because deflated tire
pressure affects tire cushion performance.  The
wheels, tires, body, suspension and other
components could be damaged.

Your ground clearance is reduced if the run−flat tire
goes flat so avoid driving over obstacles and drive
slowly on rough, unpaved roads and speed bumps.
Also, do not attempt to go through an automatic car
wash as the vehicle may get caught, resulting in
damage.

When the tires must be replaced, have them replaced
by the nearest Lexus dealer or authorized tire dealer.
The tire pressure sensor will be affected by the
installation or removal of tires.

When the tires must be replaced, replace the
grommets for tire pressure sensors as well.

Содержание GS300















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды