manualshive.com logo in svg

Lexus GS300, Руководство пользователя

Поделиться
Скачать
Lexus GS300 Скачать руководство пользователя страница 472

DRIVING TIPS

451

CAUTION

Before driving off, make sure the parking brake is
fully released and that the parking brake reminder
light is off.

Do not leave your vehicle unattended while the
engine is running.

Do not rest your foot on the brake pedal while driving.
It can cause dangerous overheating, needless wear,
and poor fuel economy.

To drive down a long or steep hill, reduce your speed
and downshift.  Remember, if you ride the brakes
excessively, they may overheat and not work
properly.  See page 359.

Be careful when accelerating, upshifting,
downshifting or braking on a slippery surface.  The
abrupt change in engine speed, such as sudden
acceleration or engine braking, could cause the
vehicle to skid or spin.

Even if the legal speed limit permits it, do not drive
over 140 km/h (85 mph) unless your vehicle has
high−speed capability tires.  Driving over 140 km/h
(85 mph) may result in tire failure, loss of control and
possible injury.  Be sure to consult a tire dealer to
determine whether the tires on your vehicle are
high−speed capability tires or not before driving at
such speeds.

Do not continue normal driving when the brakes are
wet.  If they are wet, your vehicle will require a longer
stopping distance, and it may pull to one side when
the brakes are applied.  Also, the parking brake will
not hold the vehicle securely.

Содержание GS300















































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды