Lexus 2016 GS 200t, Руководство пользователя

Страница: 141 / 624

GS350_200t_GS F_OM_OM30E86U_(U)
141
3-2. Opening, closing and locking the doors and trunk
3
Op
era
tio
n of
ea
ch
co
m
po
ne
nt
■
Switching the door unlock function
It is possible to set which doors the entry function unlocks using the wireless remote con-
trol.
Turn the engine switch off.
When the indicator light on the key surface is not on, press and hold
, or
for approximately 5 seconds while pressing and holding .
The setting changes each time an operation is performed, as shown below. (When
changing the setting continuously, release the buttons, wait for at least 5 seconds, and
repeat step .)
To prevent unintended triggering of the alarm, unlock the doors using the wireless
remote control and open and close a door once after the settings have been changed. (If
a door is not opened within 60 seconds after
is pressed, the doors will be locked
again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm. (

P. 74)
■
Impact detection door lock release system
In the event that the vehicle is subject to a strong impact, all the doors are unlocked.
Depending on the force of the impact or the type of accident, however, the system may
not operate.
■
Using the mechanical key
The doors can also be locked and unlocked with the mechanical key. (

P. 520)
■
Conditions affecting the operation of the smart access system with push-button start
or wireless remote control

P. 152
■
Customization
Settings (e.g. unlocking function using a key) can be changed.
(Customizable features:

P. 568)
1
2
2
Multi-information
display
Unlocking function Beep
Holding the driver’s door handle
unlocks only the driver’s door.
Exterior: Beeps 3 times
Interior: Pings once
Holding a passenger’s door han-
dle unlocks all the doors.
Holding a door handle unlocks
all the doors.
Exterior: Beeps twice
Interior: Pings once