Lexus 2016 GS 200t, Руководство пользователя

Страница: 106 / 624

106
GS350_200t_GS F_OM_OM30E86U_(U)
2. Instrument cluster
■
G-force display
●
The G-force values may not be zero even when the vehicle is parked, such as when it is
parked on an incline.
●
Depending on the vehicle usage conditions, the brake fluid pressure display may not
reach its maximum reading even though the brake pedal is fully depressed.
●
If a battery terminal is disconnected and reconnected, the steering amount display may
be disabled temporarily. After driving the vehicle for a while, the display will be enabled.
■
System check display
After turning the engine switch to IGNITION ON mode, opening image is displayed
while system operation is checked. When the system check is complete, the normal
screen will return.
■
Suspension of the settings display
In the following situations, the settings display using the meter control switches will be
suspended.
●
When a warning message appears on the multi-information display
●
When the vehicle begins to move
■
Tire inflation pressure
●
It may take a few minutes to display the tire inflation pressure after the engine switch is
turned to IGNITION ON mode. It may also take a few minutes to display the tire infla-
tion pressure after inflation pressure has been adjusted.
●
“---” may be displayed if the tire information cannot be determined due to unfavorable
radio wave conditions.
●
Tire inflation pressure changes with temperature. The displayed values may also be dif-
ferent from the values measured using a tire pressure gauge.
■
When disconnecting and reconnecting battery terminals
The drive information will be reset.
■
Liquid crystal display

P. 90
WARNING
■
Caution for use while driving
●
When operating the multi-information display while driving, pay extra attention to the
safety of the area around the vehicle.
●
Do not look continuously at the multi-information display while driving as you may fail
to see pedestrians, objects on the road, etc. ahead of the vehicle.
■
Cautions during setting up the display
As the engine needs to be operating during setting up the display, ensure that the vehi-
cle is parked in a place with adequate ventilation. In a closed area such as a garage,
exhaust gases including harmful carbon monoxide (CO) may collect and enter the
vehicle. This may lead to death or a serious health hazard.