-
INTRODUCTION
FOR ALL OF VEHICLES
IN-17
17
Author:
Date:
2005 LEXUS IS300 (RM1140U)
(i)
AIRBAG SENSOR ASSEMBLY
(1)
If an airbag sensor assembly has been involved in
a collision where its SRS has deployed, do not re-
use it.
(2)
The connectors to the airbag sensor assembly
should be connected or disconnected with the sen-
sor mounted on the floor. Failure to do so could
cause undesired deployment of the SRS.
(3)
To avoid serious injury, servicing the SRS must be
started 90 seconds after:
The ignition switch is turned to the LOCK
position.
The negative (-) terminal cable is discon-
nected from the battery.
Even if only loosening the set bolts of the airbag
sensor assembly, you must follow the above guide-
lines.
(j)
WIRE HARNESS AND CONNECTOR
The SRS wire harness is integrated with the instrument
panel wire harness assembly. All the connectors in the
system are a standard yellow color. If the SRS wire har-
ness becomes disconnected or the connector becomes
broken, etc., repair or replace it as shown on page
