H15183 B11669
B17162
Example:
CORRECT
WRONG
Z13951
Example:
NEVER USE AN OHMMETER ON AN AIRBAG OR PRETENSIONER
-
INTRODUCTION
FOR ALL OF VEHICLES
IN-13
13
Author:
Date:
2005 LEXUS IS300 (RM1140U)
(e)
FRONT PASSENGER AIRBAG ASSEMBLY
(1)
Always store a removed or new front passenger air-
bag assembly with the airbag deployment direction
facing up.
Storing the airbag assembly with the airbag deploy-
ment direction facing down could cause a serious
accident if the airbag inflate.
(2)
Never measure the resistance of the airbag squib.
This may cause the airbag to deploy, which is could
cause serious injury.
(3)
Grease or detergents of any kind should not be ap-
plied to the steering wheel pad.
(4)
Store the steering wheel pad where the ambient
temperature remains below 93
°
C (200
°
F), has low
humidity and is away from electrical noise.
(5)
Before using an electric welder, first disconnect the
airbag connector (the connector is yellow and has
4 pins) under the steering column near the com-
bination switch connector.
(6)
As a safety measure, always deploy airbags using
an SST before disposal (see page
Deploy airbags in a safe place away from electrical
noise.
