PKI Pre-Installation Guide
Version 2.0.0
Page 37
8.3 LDAP Configuration 3
1. Use KDC used for User Authentication as LDAP Server:
□
(If yes, skip item 2.)
2. LDAP Server IP Address/Name: _______________________________________________
3. LDAP Server Port: _______ (Typically: 389 for non-SSL, 636 for SSL)
4. SSL is required:
□
(If required, please have the SSL certificate available.)
5. LDAP Certificate Validation: (Only necessay is SSL is being used.)
□
Never
□
Allow
□
Try
□
Demand
6. Information from the card used for the lookup:
□
User Principal Name –
12345678@mil
□
RFC822 Name –
□
Subject Name –
CN=SMITH.JOE.12345678, OU=Contractor, OU=PKI,
OU=DoD, O=U.S. Government, C=US
□
EDIPI –
12345678
7. LDAP attribute representing the data read from the card:
___________________________________________
8. Search Base:
(Typically something like “ou=installation,dc=branch,dc=mil”)
_____________________________________________________________________
9. Access rights needed to access the LDAP directory:
□
Anonymous
□
User’s Credentials (Cannot be used in Pin Only mode)
□
Service Account
Distinguished Name:_______________________________________
Password: _________ To be provided at installation _________
