Lexmark WinWriter 150c, Руководство по обслуживанию

Страница: 22 / 80

13
4077-001
Paper Path Service Check
Examine the machine for the following before you begin this service
check:
•
Check the entire paper path for obstructions.
•
Be sure the paper guides are not worn or broken and are
positioned against the paper without binding or buckling the
paper.
•
Be sure the correct type of paper is being used.
•
Be sure the printer is installed on a flat surface.
FRU Action
1 Large and Small
Feed Rollers Check for wear and binds.
2 Small Feed Roller
Springs
Paper Guide
Paper Flap Check for damage.
3 Sheet Feeder Check the following for wear or damage:
• Envelope Bucklers
• All parts inside the left and right edge guides.
4 End-of-Forms
Flag Check for binds or damage.
5 Ejectors After the paper exits from the feed rollers, the
paper feed motor reverses causing the paper
ejectors to move the last sheet of paper into the
exit tray. If the ejectors do not restore, check them
for worn, loose, or broken parts. Be sure the
ejectors are connected to the large feed roll shaft.