Lexmark WinWriter 150c, Руководство по обслуживанию

Страница: 13 / 80

Diagnostic Information
4
4077-001
Error Indicator Table
Power-On-Self-Test (POST) Sequence
When you turn the printer on it performs a POST. Turn your machine
on and check for a correct POST operation by observing the
following:
1. The power light comes on.
2. The carrier moves over the maintenance station and seals the
printheads.
3. The paper feed gears turn.
4. All motors stop and the power light stays on.
If your machine completes POST with no errors, go to the “Symptom
Tables” on page 6 , locate the symptom and take the indicated
action.
If your machine does not complete POST, locate the symptom in the
following table and take the indicated action.
Error
Code
Number
of
Power
Light
Flashes
Action
64
65 7 Replace the Code Module and/or system board.
66 -
78 6 Replace the Code Module and/or system board.
83 8 Replace the Code Module and/or system board.
79 9 Replace the Code Module and/or system board.
81 1 Go to the
“Transport Service Check” on page 17
.
89 4 Go to the
“Transport Service Check” on page 17
.
127
and
up
10
Replace the Code Module and/or system board.