How do I use MarkVision Messenger?
104
To setup a Tivoli event server
To execute this command, see
Setting up the Tivoli event adapter
.
Step 9: Select a filter
A filter lets you control commands that execute when events occur. Your filter options depend on the
Event Type.
If your Action is triggered by Device Status Alerts:
•
Choose
Trigger on Active
to set the command to execute only when a condition becomes
Active. You can also choose to delay execution of the command until the condition has been
active for a specified amount of time.
•
Choose
Trigger on Either Active or Clear
to set the command to execute each time a
condition becomes Active or Clear.
•
Choose
Custom
to customize and define when the command executes. You can do this by
either uploading an existing script file or writing a new one.
If your Action is triggered by Printer Folder Alerts:
•
Choose
Simple Filter
to set the Action to execute when a device is added to the folder,
removed from the folder, or both. You can also choose to delay execution of the command
until the condition has been active for a specified amount of time.
•
Choose
Custom
to customize and define when the command executes. You can do this by
either uploading an existing script file or writing a new one.
Click
when you're ready to continue.
Step 10: Customize a filter
If you choose
Custom
from the Filter Type screen, you can customize and define how your action
executes. Do this by either uploading a previously defined script file or by writing a new one.
•
To upload a previously defined script file:
1
From the Custom Filters screen, enter the name of the script file you want to upload, or
click
Browse...
to locate it.
2
Click
Load
. The script file appears in the text field.
3
Click
when you're ready to continue.
•
To write a new script file:
1
From the Custom Filters screen, type new script information into the text field.
2
Click
when you're ready to continue.
