Lexmark Jetprinter 4079-00 series Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 183

background image

Second Edition (May, 1997)

The following paragraph does not apply to the United Kingdom or any
country where such provisions are inconsistent with local law: LEXMARK
INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow
disclaimer of express or implied warranties in certain transactions, therefore,
this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in later editions of the publication. Improvements or changes in the
products or the programs described in this publication may be made at any
time. Publications are not stocked at the address given below; requests for
publications should be made to your point of purchase.

Comments may be addressed to Lexmark International, Inc., Department
D22A/035-3, 740 New Circle Road NW, Lexington, Kentucky 40550, U.S.A.
Lexmark may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.

Lexmark is a trademark of Lexmark International, Inc., registered in the United
States and/or other countries.

Color Jetprinter is a trademark of Lexmark International, Inc.

Other trademarks are the property of their respective owners.

©Copyright Lexmark International, Inc. 1995, 1997

All rights reserved.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS.
Use, duplication or disclosure by the Government is subject to restrictions as
set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer
Software clause at DFARS 252.227-7013 and in applicable FAR provisions:
Lexmark International, Inc., Lexington, KY 40550 USA.

4079-00X

«
1
2
3
4
...
»

Содержание Jetprinter 4079-00 series
























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Jetprinter 4079-00 series

Бренд: Octave Страницы: 2

Бренд: MAKERGEAR Страницы: 8

Panafax UF-7000

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 68

Бренд: Panasonic Страницы: 120

Бренд: Panasonic Страницы: 100

KX-MB781 - B/W Laser - All-in-One

Бренд: Panasonic Страницы: 96

Бренд: Panasonic Страницы: 130

Бренд: Oki Страницы: 210

Бренд: Panasonic Страницы: 77

Бренд: Panasonic Страницы: 402

Бренд: Panasonic Страницы: 54

Workio DP-8016P

Бренд: Panasonic Страницы: 88

Бренд: Panasonic Страницы: 60

Бренд: Xante Страницы: 25

Бренд: quadient Страницы: 130

Бренд: Canon Страницы: 4

Бренд: BIXOLON Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды