Lexmark Jetprinter 4079-00 series Скачать руководство пользователя страница 135

Страница: 135 / 183

Preventive Maintenance

6-1

4079-00X

6. Preventive Maintenance

This chapter describes procedures for printer preventive mainte-
nance. Following these recommendations can help prevent prob-
lems and maintain optimum performance.

Safety Inspection Guide

The purpose of this inspection guide is to aid you in identifying
unsafe conditions.

Use good judgment to identify possible safety conditions not covered
by this inspection guide. Refer to the safety reminders for a general
checklist.

If any unsafe conditions exist, find out how serious the hazard could
be and if you can continue before you correct the hazard.

Check the following items:

•

Damaged, missing, or altered parts, especially in the area of the
On/Off switch and the power supply.

•

Damaged, missing, or altered covers, especially in the area of
the top cover and the power supply cover.

•

Possible safety exposure from any non-Lexmark attachments.

Содержание Jetprinter 4079-00 series
























































































































































































Результаты поиска

Содержание Jetprinter 4079-00 series

Отзывы:

Похожие инструкции для Jetprinter 4079-00 series

Бренды по названию

Популярные бренды

Lexmark Jetprinter 4079-00 series, Руководство по обслуживанию

Результаты поиска

Содержание Jetprinter 4079-00 series

Отзывы:

Похожие инструкции для Jetprinter 4079-00 series

Бренды по названию

Популярные бренды