Lexmark E238, Руководство по обслуживанию, Страница: 91 / 259

4511-xxx
Diagnostics—E340 and E342n
2-59
35 Res Save Off
Deficient Memory
The printer lacks sufficient memory to enable
Resource Save. The following actions may be
taken:
• Press Go to clear the message. The printer
disables Resource Save.
• Install additional memory.
• Set link buffers to Auto, return to Ready,
enable Resource Save, and reset the link
buffers.
37 Insufficient
Defrag Memory
This message displays prior to the actual start
of the defragmentation process. If there is not
enough free memory available to complete the
process, the process will not proceed, and no
data already in memory will be lost.
While this message is displayed, the following
actions may be taken:
• Press Go to clear the message. To perform
defragmentation operation, you can:
– Delete fonts, macros, and other data from
RAM.
– Install additional printer memory.
• Press Menu until Job Menu appears. The
following functions may be available:
– Cancel Job
– Reset Printer
37 Insufficient
Memory
Held Jobs may be
lost
This message displays when there is not
enough memory available to continue
processing a job, and Print and Hold feature is
in use. The printer frees memory by deleting
the oldest Reserve Print and Verify Print jobs.
It deletes only the amount needed to continue
the incoming job. Some or all of the jobs may
not be restored. If, while printing the current
job, it runs out of memory again, another
message is not posted.
• Press Go to clear the message. Some of
the Print and Hold jobs on the disk will not
be restored. They remain on the disk, but
cannot be accessed.
• Press Menu until
Job Menu
appears. The
function, Reset Printer, may be available.
User attendance messages (continued)
Message Explanation