Lexmark CX820 Series Скачать руководство пользователя страница 190 | Manualshive

Страница: 190 / 199

background image

Notices

Product information

Product name:

Lexmark XC8155de, XC8155dte, XC8160de, XC8160dte

Machine type:

7564

Model(s):

596, 598

Edition notice

March 2016

The following paragraph does not apply to any country where such provisions are inconsistent with local
law:

LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made
to the information herein; these changes will be incorporated in later editions. Improvements or changes in the
products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to
make these available in all countries in which it operates. Any reference to a product, program, or service is
not intended to state or imply that only that product, program, or service may be used. Any functionally
equivalent product, program, or service that does not infringe any existing intellectual property right may be
used instead. Evaluation and veriﬁcation of operation in conjunction with other products, programs, or services,
except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit

http://support.lexmark.com

.

For information on supplies and downloads, visit

www.lexmark.com

.

© 2016 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is deﬁned in 48
C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are
used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R.
227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software
Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only
those rights as are granted to all other end users pursuant to the terms and conditions herein.

Notices

190

«
...
188
189
190
191
192
...
»

Содержание CX820 Series








































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CX820 Series

NEFAX - 691 B/W Laser

Бренд: NEC Страницы: 20

Panafax UF-7000

Бренд: Panasonic Страницы: 28

Бренд: Panasonic Страницы: 68

Бренд: Panasonic Страницы: 120

Бренд: Panasonic Страницы: 100

KX-MB781 - B/W Laser - All-in-One

Бренд: Panasonic Страницы: 96

Бренд: Panasonic Страницы: 130

Бренд: Oki Страницы: 210

Бренд: Panasonic Страницы: 77

Бренд: Panasonic Страницы: 402

Бренд: Panasonic Страницы: 54

Workio DP-8016P

Бренд: Panasonic Страницы: 88

Бренд: Panasonic Страницы: 60

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 341

Бренд: Samsung Страницы: 8

CLX2160N - Color Laser - All-in-One

Бренд: Samsung Страницы: 118

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды