Lexmark 7016-630 Скачать руководство пользователя страница 59

Страница: 59 / 455

Error code

Description

Action

202.32

The sheet is too long to be duplexed. The blow
through is enabled.

Go to

“Duplex service check” on page 62

202.36

Long paper or shingled multi feed stopped before
sending to duplex.

202.43

During warm up flush, media that passed the input
sensor failed to reach the exit sensor.

Go to

“Sensor (fuser exit) jam service check” on

page 59

202.45

During warm up flush, sheet detected too long over
exit sensor.

Sensor (fuser exit) jam service check

Action

Yes

Step 1

Check the input sensor area for jammed media fragments.

Is the paper path free of partially fed or jammed media?

Go to step 2.

Clear the paper path of
any media fragments.

Step 2

Check the fuser exit sensor cable JEXIT1 for proper connection.

Is it properly connected?

Go to step 3.

Reseat the cable.

Step 3

POR into the Diagnostics menu and perform a sensor test:

Diagnostics Menu

Base Sensor Test

Exit

Does the sensor state on the control panel display change when it is
toggled?

Go to step 4.

Replace the fuser. See

“Fuser removal” on
page 302

Step 4

Check the fuser gears and rollers for damage.

Are they free of damage?

Go to step 5.

Replace the fuser. See

“Fuser removal” on
page 302

Step 5

Does the error remain?

Contact the next level
of support.

The problem is solved.

7016

Diagnostic information

Содержание 7016-630








































































































































































































































































































































































































































































Результаты поиска

Содержание 7016-630

Отзывы:

Lexmark 7016-630, Руководство по обслуживанию, Страница: 59 / 455

Результаты поиска

Содержание 7016-630

Отзывы: