Lexmark 7016-630 страница 100 Скачать руководство пользователя

Страница: 100 / 455

Restore held jobs?

Try one or more of the following:

•

From the printer control panel, touch

Restore

to restore all held jobs stored in the printer hard disk.

•

From the printer control panel, touch

Do not restore

if you do not want to restore any of the print jobs.

Scanner automatic feeder cover open

Close the ADF cover.

Scanner disabled by admin [840.01]

Print without the scanner, or contact your system support person.

Scanner disabled. Contact system administrator if problem persists. [840.02]

Try one or more of the following:

•

Touch

Continue with scanner disabled

to return to the home screen, and then contact your system support person.

•

Touch

Reboot and automatically enable scanner

to cancel the job.

Note:

This attempts to enable the scanner.

Scanner jam, remove all originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Scanner jam, remove jammed originals from the scanner [2yy.xx]

Remove the jammed paper from the scanner.

Serial port [x] disabled [56]

Try one or more of the following:

•

From the printer control panel, touch

Continue

to clear the message.

The printer discards any data received through the specified serial port.

•

Make sure Serial Buffer is not set to Disabled.

•

From the printer control panel, set Serial Buffer to Auto in the Serial [x] menu.

SMTP server not set up. Contact system administrator.

From the printer control panel, touch

Continue

to clear the message.

Note:

If the message appears again, then contact your system support person.

7016

Diagnostic information

100

Содержание 7016-630








































































































































































































































































































































































































































































Результаты поиска

Содержание 7016-630

Отзывы:

Похожие инструкции для 7016-630

Бренды по названию

Популярные бренды

Lexmark 7016-630, Руководство по обслуживанию

Результаты поиска

Содержание 7016-630

Отзывы:

Похожие инструкции для 7016-630

Бренды по названию

Популярные бренды