manualshive.com logo in svg

Lexmark 2500 Series, Руководство пользователя

Поделиться
Скачать
Lexmark 2500 Series Скачать руководство пользователя страница 71

•

Make sure the right paper guide is set correctly for the paper width being used.

•

Make sure the Auto Cut Sheet Load option is set correctly. For more information, see “Main menu options” on
page 50.

•

Make sure the paper select lever is in the correct position for the type of sheet you are trying to print.

Printer does not feed from the optional Tractor 2 Feeder

These are possible solutions. Try one or more of the following:

•

Move the paper select lever down to the   position.

•

Press 

Tractor

 to select the other tractor feeder or load paper on the selected tractor feeder.

•

Plug the optional Tractor 2 Feeder into the back of the printer.

Printer does not feed from the Auto Sheet Feeder

These are possible solutions. Try one or more of the following:

•

Set the Auto Sheet Feeder locking lever to the back position.

•

Set the paper select lever to the   position.

•

Enter Setup mode and set the option to On. For more information, see “Main menu options” on page 50.

•

Remove extra sheets of paper if more than 150 sheets are loaded.

•

Remove all paper, and then replace it with paper that has a lower weight.

•

Remove all paper, fan the top and bottom edges, and then place it back in the paper bin.

•

Clean the Auto Sheet Feeder rollers:

1

Remove all paper from the printer.

2

Turn the Auto Sheet Feeder upside down, and then place it on a flat surface.

3

Clean the two paper guide wheels located inside the bottom of the Auto Sheet Feeder using isopropyl alcohol
and a clean cloth.

Rotate one roller while applying the cleaning cloth to the other roller.

The optional Tractor 2 Feeder positions paper at incorrect

Top-Of-Form position

The Top-Of-Form is set incorrectly. For more information about correctly setting Top-Of-Form, see “Setting Top-of-
Form” on page 40.

The Auto Sheet Feeder feeds paper at an incorrect rate

These are possible solutions. Try one or more of the following:

•

Remove all paper from the Auto Sheet Feeder and replace it with paper that has a lighter weight.

•

Remove the Auto Sheet Feeder, remove any bits of paper or foreign objects, and then reinstall the Auto Sheet
Feeder.

•

Move the paper guide to the left.

•

Remove the Auto Sheet Feeder, move the continuous forms to the park position using the 

Load/Unload

 button,

and then reinstall the Auto Sheet Feeder.

•

Adjust the forms thickness lever to correspond with the paper thickness being used.

Troubleshooting

71

Содержание 2500 Series






















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды