Lexmark 13R0243 X4875 2.0/PictBridge/ Скачать руководство пользователя

Страница: 64 / 76

Left/Right Cartridge Missing

This message indicates that one of the necessary cartridges is missing. You need to install a print cartridge.

Communication not available

The printer and computer may not be able to exchange data.

Is the printer receiving power?

is not lit, the printer may not be receiving power.

•

Plug the printer into a different outlet.

•

If the printer is plugged into a surge protector, unplug the printer, and plug it directly into an electrical outlet.

Is there a problem with the connections?

If the printer is connected to an external device, the problem may be with the device. Check the setup information
that came with the device to make sure it is properly installed.

If printing using a USB cable, make sure the cable is securely attached to both the printer and the computer.

Before you print, you may need to restart the computer.

General Printing Problem

You cannot receive a more specific error message because the printer and the computer do not have bidirectional
communication.

To receive a more specific error message, see “Bidirectional communication is not established” on page 135.

To find the problem without establishing bidirectional communication, see “Checking printer readiness” on
page 127.

Ink Low

A print cartridge is almost out of ink.

Install a new cartridge. For more information, see “Installing print cartridges” on page 94.

To order a new cartridge, see “Ordering supplies” on page 99.

Out of Memory

The printer software cannot obtain enough memory to print.

154

Содержание 13R0243 X4875 2.0/PictBridge/













































































Результаты поиска

Содержание 13R0243 X4875 2.0/PictBridge/

Отзывы:

Похожие инструкции для 13R0243 X4875 2.0/PictBridge/

Бренды по названию

Популярные бренды

Lexmark 13R0243 X4875 2.0/PictBridge/, Сетевое руководство

Результаты поиска

Содержание 13R0243 X4875 2.0/PictBridge/

Отзывы:

Похожие инструкции для 13R0243 X4875 2.0/PictBridge/

Бренды по названию

Популярные бренды