LEXIN LX-B2, Руководство пользователя

Страница: 9 / 13

7
5.3.3 End Intercom Talk
To terminate an intercom conversation, short press again the Intercom Button.
5.4 Universal Pairing:
While pairing with other brand intercom headset if needed, the pairing operation is
same as two way intercom pairing. Just hold and press the function button for 5
seconds,and other brand intercom follow the pairing instruction to enter paring mode.
Then short press the intercom button on LX-B2 till the LEDs are blinking blue.
To start or quit the intercom conversation, simply press the intercom button.
5.5 Bluetooth Wireless Stereo Music
The Bluetooth audio device must be paired with the LX-B2 by following the
Bluetooth Audio Device Pairing instructions described in the previous chapter. The
LX-B2 supports the Advanced Audio Distribution Profile (A2DP), so if your
Bluetooth audio device also supports A2DP, you can use the LX-B2 to remotely
control music playback. You may play and pause the music as well as adjust the
volume.
- Press or Volume – button to adjust the volume
- Press Function button to play/pause the music
- Press & hold the or Volume – buttons to skip tracks forward or back.
5.6 Function Priority
The LX-B2 operates in the following order of priority:
1. Mobile phone (highest)
2. Intercom
3. Bluetooth stereo music (lowest)
A lower-priority function is always interrupted by a higher-priority function. For
example, stereo music is interrupted by an Intercom call, and Intercom conversation is
interrupted by an incoming mobile phone call.
5.7 Reset
To clear the previous pairing, press and Function button simultaneously
until the LED turns purple.
Note: In some cases (high power RF radio influence or a metal block), the unit may
become interrupted and will cease to work at all, please fully charge the unit to reset
the system.
6. Maintenance and Care
The LX-B2 should be treated with care and the following suggestions will help maintain your Warranty.
6.1. Do not use or store the device in dusty or dirty environments. Moving parts and electronic components can be
damaged.
6.2. Do not store the device in high heat areas. High temperatures can shorten the life of electronic devices,
damage batteries, and warp or melt certain plastics.
6.3. Do not store the device in cold temperature areas. When the device returns to its normal temperature moisture
can form inside the device and damage electronic circuit boards.