LEXIN LX-B2, Руководство пользователя

Страница: 10 / 13

8
6.4. Do not attempt to open the LX-B2case.
6.5. Do not drop or knock the device. Rough handling can break internal circuit boards and fine mechanics.
6.6. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
6.7. Do not paint the device. Paint can clog the moving parts and prevent proper operation.
These suggestions apply equally to the headset main unit, speaker-microphone clamp unit, and power charger.
7. Certification and Safety Approvals
• FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference;
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in an installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
• FCC RF Exposure Statement
The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operated in conjunction with any other antenna or transmitter.
• FCC Caution
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance
could void user’s authority to operate the equipment.
• CE Declaration of Conformity
This product is CE marked according to the provisions of the RandTTE Directive (99/5/EC). Hereby, LEXIN
declares that this product is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
8. Warranty
LEXIN warrants that this product shall conform to and perform in accordance with published technical
specifications and the accompanying written materials, and shall be free of defects in materials and workmanship,
for a period of one (1) year from the date of purchase by the first consumer purchaser of the Product. The limited
warranty
extends only to the original consumer purchaser of the Product and is not assignable
or transferable to any subsequent purchaser/end-user.
This warranty is limited to the repair and/or replacement, at LEXIN’s discretion, of defective or non-conforming
Product, and LEXIN shall not be responsible for the failure of the Product to perform specified functions, or any
other non- conformance caused by or attributable to: (a) any misapplication or misuse of the Product; (b) failure of
Customer to adhere to any of LEXIN’s specifications or instructions; (c) neglect of, abuse of, or accident to, the
Product; or (d) any associated or complementary equipment or software not furnished by LEXIN.