Lexicon PCM 81 - REV, Руководство пользователя

Страница: 129 / 174

Lexicon
4-2
PCM 81 User Guide
Program Bank 0 (P0)
Multi Effects
(P0 0.0 – P0 1.9)
0.0 Prime Blue ADJUST: Efx/Rvb X 0–127
A combination of 3 stereo effects: 6 voice chorus, rhythmic echoes, and reverb. You can
dial-in the exact proportion of each. As ADJUST is turned from 0 to 127 the effect smoothly
changes from chorus only , to chorus with echoes, to chorus with echoes and reverb, to
reverb with echoes, and finally to reverb only. Use Tap to set the echo rhythms.
0.1 EkoChorus ADJUST: FX Mix 0–127
A 6 voice stereo chorus with echoes and stereo reverb. ADJUST controls the mix of
chorus/echoes with reverb. The Soft Row provides all the tweaks you’ll need to get the
most out of this classic multi effect.
0.2 Wet Chorus ADJUST: FX Mix 0–100
This is a thick wet chorus combined with a small amount of reverb to produce a large lush
sound. It can fatten up any track and is especially good for adding body to guitar. ADJUST
controls the combination of delays and chorus with reverb.
0.3 Wet Chorus 2 ADJUST: FX Mix 0–100
This is a variation of Wet Chorus with a subtle amount of delays and reverb to produce
just the right amount of ambience. ADJUST controls the combination of delays and
chorus with reverb.
0.4 Wet Chorus 3 ADJUST: FX Mix 0–100
A variation of Wet Chorus 2 with even thicker chorus (bordering on a slight flange) and
slightly modified delays. ADJUST controls the combination of delays and chorus with
reverb.
0.5 Chorus Plate ADJUST: KorusMix 0–100
Combination of smooth rolling delays in the reverb shell combined with a more aggres-
sively modulated reverb tail. ADJUST changes the non-modulated to modulated reverb
tail. Twisted for guitar.
0.6 Chorus Room ADJUST: Decay 0–80
Slow chorus applied to one side of the reverb. The speed of the modulation follows input
level. ADJUST controls the reverb decay.
0.7 ChorusToRvb ADJUST: Decay 0–127
Input level controls the relative mix of stereo chorus and reverb. Loud signals are mostly
chorus and the reverb level comes up as the signal fades away. ADJUST controls the
reverb decay time.
0.8 Funkus Room ADJUST: LFO Rate 0–100
This preset works great on electronic pianos / keyboards. Strong modulation applied to
both delays and reverb tail. ADJUST controls the speed of the LFO modulation.
0.9 Detune & Room ADJUST: Detune 0–127
A very tight room combined with separate pitch modulation on the left and right inputs.
ADJUST controls the depth of the detuning.
1.0 Detune&Dbl ADJUST: Detune 0–127
Similar to Detune & Room, but several delay voices have been added to produce doubling
effects. ADJUST controls the amount of detune on each side. Soft Row goodies include
a master delay control that allows you to vary the time difference between the delay
voices.
1.1 Tight Space ADJUST: SplitWide 0–100
A bright, dry ambience combined with left and right detune and delay. ADJUST controls
the amount of detune as well as the left/ right delay spread.