Lexicon
MPX R1 User Guide
5-2
The front panel Yes/+ and No/- buttons allow you to select a Setup number (1-
100) for programming. This number is assigned to the 1/PITCH button.
Each of the MPX R1 front panel buttons numbered 2-9 is now available to
memorize Program Change messages. (Button 0/ON/OFF 4 is available for
storing a relay state.)
Select the button you want (2-9) to designate a particular MIDI device.
MPX R1 Button
2/CHORUS
Device 1
3/DELAY
Device 2
4/ON/OFF 1
Device 3
5/ON/OFF 2
Device 4
6/REVERB
Device 5
7/EQ
Device 6
8/MOD
Device 7
9/ON/OFF 3
Device 8
The BANK buttons will now select one of four parameters available to define the
Program Change messages you want to send. The Yes/+ and No/- buttons set
the value for each parameter you select.
PC (Program Change) lets you select a MIDI Program Change message (0-999)
for the selected device. This parameter is specific to each Setup.
Ch (MIDI Channel) lets you select a MIDI Channel (1-16) for communication with
the selected device. This channel will be used for any devices assigned to this
button. This parameter is global for each device.
PPb (Programs Per Bank) lets you specify the number of programs in each bank
(0-999), and therefore, when a bank change message will be transmitted. This
parameter is global for each device.
bC (Bank Change Message) lets you define the Bank Select message (0, 32 or
032) to be transmitted to the selected device. This parameter is global for each
device.
Once these parameters have been set, you can test the device by pressing 2/
CHORUS. This will output all of the MIDI information you have programmed for
the selected device.
To select a relay state to store with the Setup, press 0/ON/OFF 4. This button
is reserved for Setup relay state assignments. When you press the button, the
display should show rEL. on the display)
The Yes/+ and No/- buttons allow you to select the relay state you want stored
with the Setup.
To clear a Setup, go to Setup Edit mode, and select the number of the Setup you
want to clear, and hold down the BYPASS button. All of the front panel LEDs
except 1/PITCH will turn off, indicating that the Setup has been cleared.
Clearing a Setup
Setup Parameters
Содержание MPX R1 -
Страница 1: ...User Guide MIDI Remote Controller MPX R1 ...
Страница 18: ...Lexicon MPX R1 User Guide 3 4 ...
