Lexicon
MPX R1 User Guide
4-4
External Pedal Calibration
Default:
Off
Calibrates the pedal when Yes/+ is selected. Moving the pedal through its entire
range of travel will re-calibrate the range of the pedal (i.e. 0 for minimum value,
127 for maximum value).
MIDI IN Merge On/Off
Default:
Off
When set to On, MIDI data received at the MIDI IN jack will be merged to the MIDI
OUT jack.
MIDI THRU Routing Select
Default:
rE
Allows data from MIDI IN (in) or MIDI remote (rE) to be passed to the THRU port.
Relay Mode Select
Default:
1
Allows you to choose how the relay operates. The choices are: 1=latching,
2=momentary normally open, 3=normally closed.
Relay Initialize
Default:
–
Initializes all of the stored relay states. Choices are Yes or No.
Tempo LED On/Off
Default:
On
Allows you to turn the Tempo LED On or Off. The LED is normally On.
Device ID Assign Mode
Default:
0
Sets a Device ID number (0-126) for the remote.
Target ID Assign Mode
Default:
0
Set a Target ID number (0-126) for the remote.
MIDI Dump All
Default:
–
When Yes/+ is pressed, all global settings, system parameters, controller
assignments, relay states and setup information will be dumped via SysEx to the
MIDI OUT port.
MIDI System Dump
Default:
–
When Yes/+ is pressed, all system parameters will be dumped via SysEx to the
MIDI OUT port.
MIDI Controllers Dump
Default:
–
When Yes/+ is pressed, all Controller Assignments will be dumped via SysEx
to the MIDI OUT port.
24
25
26
27
28
29
30
31
32
33
23
Содержание MPX R1 -
Страница 1: ...User Guide MIDI Remote Controller MPX R1 ...
Страница 18: ...Lexicon MPX R1 User Guide 3 4 ...
