Lexicon MPX R1 -, Руководство пользователя

Страница: 21 / 34

4-3
Editing
Program Number Format Select Default: 1
Allows selection of one of two numbering systems: 0-127 (0) or 1-128 (1) for
program numbering. This is a display change only — In MIDI terms, the remote
will always send 0-127 values.
Bank Limit Select Default: 25
When the MPX R1 is not connected to an MPX 1 (which forces 25 banks), a
maximum bank number can be selected here to limit the total number of
accessible banks. The available range is 0-99.
Programs Per Bank Default: 100
Specifies the number of programs in each bank (and thereby tells the MPX R1
when to send a bank change message). The available range is 1-128.
Bank Change Default: 32
Allows selection of the MIDI Controller number to be used as the transmitted
Bank Select message, 0, 32 or 032.
Pedal Curve Select Default: 1
Allows selection of a pedal curve. The available settings are 1-3.
11
12
13
14
15
16
17
18
19
20
21
22
1
2
3
Pedal Range Limit Low Default: 0
Sets the controller value (0-127) transmitted when the pedal is in its lowest
position.
Pedal Range Limit High Default: 127
Sets the controller value (0-127) transmitted when the pedal is in its highest
position.
External Pedal Curve Select Default: 1
Selects a pedal curve (1-3).
External Pedal Range Limit Low Default: 0
Sets the controller value (0-127) transmitted when the pedal is in its lowest
position.
External Pedal Range Limit High Default: 127
Sets the controller value (0-127) transmitted when the pedal is in its highest
position. The default setting is 127.
Pedal Update Mode Default: On
When set to On, the pedal will update the current pedal controller value
immediately. When pedal update is set to Off, the pedal controller value will only
be updated when the pedal is moved.
Internal Pedal Calibration Default: Off
Calibrates the pedal when Yes/+ is selected. Moving the pedal through its entire
range of travel will re-calibrate the range of the pedal (i.e. 0 for minimum value,
127 for maximum value).