Lexicon JAM MAN, Руководство пользователя

Страница: 31 / 32

27
Any changes made to Channel assign-
ment are temporary. Recognition of these
messages on Channel 1 will be re-enabled
on power-up.
MIDI Fade
A fade option is available via MIDI. Pro-
gram Change messages 9, 10, and 11 allow
selection of three fade durations. Due to the
nature of the fade, duration designations are
simply "short", "medium", and "long".
Enabling fade causes a level reduction
with each loop repeat. The actual duration of
a fade will vary with loop length.
Note that when fade is active, all front
panel function LEDs will light. If TAP is
pressed while a fade is active, JamMan will
resume loop play with LAYER cued. Play is
resumed at the faded level.
MIDI Mute/Restart
MIDI Program Change 20 allows you to
stop (mute) JamMan. When this message is
received, the current loop is muted, and a
stop message is transmitted via the OUT
port. The front panel MUTE LED will light,
and the
TEMPO LED will flash to indicate
JamMan is muted with a loop running.
Once JamMan is muted this way, a second
Program Change 20 will restart both the
current loop, and any connected drum ma-
chine, allowing you to resume play at the
beginning of a loop.
Any other Program Change message (1-
19), or any footswitch or front panel com-
mand received while JamMan is muted with
Program Change 20, will cause JamMan to
unmute and act on the command.
You can control JamMan from a MIDI Controller
that sends MIDI Program Change messages.
OUTPUT MIX INPUT TEMPO
MUTE/
LAYER/
REPLACE/
FUNCTION RESET/BYPASS
PUNCH IN
LOOP
PHRASED
LOOP
3
4
6
8
12
16
24
MIDI
DRY WET
SELECT TAP ECHO
SAMPLE
3
4
6
8
12
16
24
MIDI
OUTPUT MIX INPUT TEMPO
MUTE/
LAYER/
REPLACE/
FUNCTION RESET/BYPASS
PUNCH IN
LOOP
PHRASED
LOOP
3
4
6
8
12
16
24
MIDI
DRY WET
SELECT TAP ECHO
SAMPLE
3
4
6
8
12
16
24
MIDI
MIDI
Controller
Drum Machine
or
Sequencer
MIDI OUT MIDI IN
MIDI IN
MIDI IN
MIDI OUT
MIDI
THRU
Box