Lexicon JAM MAN, Руководство пользователя

Страница: 6 / 32

INPUT
Sets the level of the incoming
signal. Status LED indicates
acceptable signal level
(green), or overload (red).
OUTPUT
Controls the output level.
MODE
Allows selection of three basic modes:
ECHO,SAMPLE or LOOP (PUNCH-IN or
PHRASED).
When the unit is being used with an external
MIDI Clock, this knob allows selection of loop
size — expressed in MIDI quarter-notes (3
beats/loop, 4 beats/loop, etc.)
Front Panel Overview
FUNCTION
Selects the function assigned to TAP and lights the
corresponding LED (MUTE, LAYER or REPLACE).
A blinking LED indicates function is selected and
cued to be activated by next TAP. LEDs can also
indicate selected echo rhythm.
MIX
Controls the proportion of processed
(wet) to unprocessed (dry) signals.
TEMPO
Depending on the mode of operation,
LED blinks at the current tempo, or lights
during sample record and play.
TAP
Enters timing information. Two
pushes define a tempo. Also toggles
the selected function on/off.
SELECT
Depending on the mode of operation,
selects feedback level, audio trigger
threshold, or selects a loop.
DISPLAY
Significance of symbols varies with mode of
operation. Plus (+) and minus (-) symbols,
numeric display of digits 0-16, and decimal
point provide visual feedback in each mode.
2
RESET/BYPASS
Depending on the mode of
operation, RESET resets the
unit; BYPASS toggles muting.
OUTPUT MIX INPUT
TEMPO
MUTE/
LAYER/
REPLACE/
FUNCTION RESET/BYPASS
PUNCH IN
LOOP
PHRASED
LOOP
3
4
6
8
12
16
24
MIDI
DRY WET
SELECT TAP
ECHO
SAMPLE
3
4
6
8
12
16
24
MIDI