Copyright © Lexibook 2005
18
TROUBLESHOOTING
Solution :
Wait for about 1-2 minute to ensure the remote
sensor and receiver are in phase. Otherwise,
re-synchronize receiver by holding
CHN
for 3
seconds until a beep is heard.
Ensure the remote sensor is out of direct sunlight,
and away from sources of heat.
Repeat the learning procedures.
- Temperature may be below -30°C.
- Batteries in remote sensor may need
changing.
- Move remote sensor closer to the receiver.
- Make sure remote sensor is away
from sources of electrical disturbance.
Problem:
The temperature measurements of
the remote sensor and receiver do
not match.
Temperature reading of outdoor
remote sensor seems too high.
Receiver is no longer receiving
remote sensor signals or display.
SM1820GB 11/04/2005 10:19 Page 18
