Copyright © Lexibook 2005
6
Your Meteoclock works with 2 AA batteries for the main unit and 2 AAA for the remote sensor (all not
included).
Battery installation
1. Main Unit:
Use your finger to lift the battery door located
at the back of the main unit. Insert 2 AA batteries
according to the polarity. Close back the battery
compartment.
2. Remote Sensor:
Use a screwdriver to open the battery
door located at the back of the remote sensor unit. Insert
2 AAA batteries according to the polarity. Close back the
battery compartment and tighten the screw.
LOW BATTERY INDICATION:
If the batteries of the remote
sensor are low, the following indicator
will be displayed on
the main unit above the outdoor humidity display
[A14]
.
Please replace the remote sensor’s batteries. The indicator will
also be displayed on the top of the remote sensor’s screen. When the main unit’s LCD display
becomes dim, it indicates that the batteries are low and need to be changed.
Please make sure the main unit has NOT been turned on.
SETTING THE REMOTE SENSOR
1.
Unscrew the battery cover located at the back of the sensor unit and insert 2xAAA batteries to begin
the settings.
SETTINGS
POWER SUPPLY
Remote Sensor
Main Unit
SM1820GB 11/04/2005 10:19 Page 6
