42
11.2.
Transportation in a vehicle with the person in the
wheelchair
The
LEVO
C
3
passed the crash test after the norms ISO 7176/19 and
ANSI/RESNA WC/Vol. 1-Section 19.
The
LEVO
C
3
has been positively crash tested for car transportation after the
norms mentioned above. Please read the information/instructions below:
Certified test centre:
Millbrook Proving Ground Ltd, Bedford MK45 2JQ,
UK
Millbrook Report No.:
MBK 07/0995
Millbrook Test No.:
S10169
Restraints Wheelchair:
Q’Straint 4 Punkte Gurten mit Karabiner
(http://www.qstraint.com/english/products/products.a
spx)
Restraints Occupant:
Q’Straint Vehicle Anch 3-Pt
Requirements ISO 7176/19:
Pass
And ANSI/RESNA Section 19: Pass
Preparations of the
LEVO
C
3
before using it for car transportation:
1.
The chair has to be tight down by using the Q’Straint 4 pt with karabiners or
any restraint system that has been tested and passed the ISO 10542/2
standards.
2.
The occupant has to be safely secured by using the Q’Straint Vehicle Anch 3-Pt
or any restraint system that has been tested and passed the ISO 10542/2
standards.
12.
Cleaning
Whenever the wheelchair gets dirty it should be cleaned using a damp cloth
and then dried thoroughly.
For more stubborn stains wipe with a damp cloth using a mild solution of
warm water and a mild cleansing agent.
Never use furniture polish, spirit or solvents to clean the frame.
In case of dirt on the seat cushion cover or the back rest cover, you can
remove both of it and wash it softly. Do not wash it warmer than
40 degree
Celsius or according the cleaning instructions on the label inside the
cushion cover.
Caution: Never use high pressure water cleaner.
