Levo AG C3 Скачать руководство пользователя страница 44

Страница: 44 / 50

13.2.2.

Weekly checks

Solenoid (parking) brake:

This test should be carried out on a level floor with at least one meter clear space
around the wheelchair.

Switch on the control system.

Check that the battery gauge remains on, or flashes slowly, after one
second.

Push the joystick slowly forwards until you hear the parking brakes
operate.
The chair may start to move.

Immediately release the joystick. You must be able to hear each parking
brake operate within a few seconds.

Repeat the test a further three times, pushing the joystick slowly
backwards, left and right.

Connectors:

Make sure that all connectors are securely mated.

Cables:

Check and ensure that the condition of all cables and

connectors are OK and without damage.

Joystick gaiter:

Check the thin rubber gaiter or boot, around the base of the
joystick shaft, for damaged or splitting. Check visually only,
do not handle the gaiter.

Mounting:

Make sure that all the components of the control system are
securely mounted. Do not over tighten any securing screws.

13.3.

Spare parts

LEVO AG

delivers single parts or modules as spare parts. Your distributor can

provide all spare parts listed for your

LEVO

. You have also the opportunity to

order a spare part list from

LEVO AG

directly.

Содержание C3



















































Результаты поиска

Содержание C3

Отзывы:

Похожие инструкции для C3

Бренды по названию

Популярные бренды

Levo AG C3, Инструкция по эксплуатации

Результаты поиска

Содержание C3

Отзывы:

Похожие инструкции для C3

Бренды по названию

Популярные бренды