User Manual for BFS-i06
www.levitronix.com
PL-3502-00, Rev00, DCO# 21-249
16
4.2 Mechanical Installation
CAUTION
High magnetic field strength of fan rotor.
The fan rotor contains magnets with high field strength. This may alter
or damage the calibration of sensitive electronic devices and measuring
instruments in the immediate surroundings. Keep at a safe distance from
computers, monitors and all magnetic data storage media (e.g. disks,
credit cards, audio and video tapes etc.)
!
WARNING
High magnetic field strength of fan rotor if removed from motor.
The fan rotor contains magnets with high field strength. If removed from
motor, pacemakers may be influenced, and magnetic forces may lead
to contusions. Only remove rotor if necessary. Keep distance to
pacemakers and handle fan rotor with care.
!
WARNING
Only specific BFS-i06 bearingless fans are classified for the use in Ex
classified locations. Refer to the corresponding section in the manual.
!
WARNING
In case separation of Ex classified locations is needed at installation, the
relevant safety precautions to fulfill the relevant regulatory requirements
must be considered.
•
Ex cable sealing system:
An Ex conform solution is needed for the motor cable to leave the Ex area.
One option is an Ex certified cable sealing system as listed in
•
Rotor handling:
The rotor contains permanent magnets which can attract ferromagnetic parts.
Therefore, any ferromagnetic tools and tools with sharp edges should be kept away from the rotor to
avoid injury to personnel and damage to the rotor surface. Do not remove rotor from fan unless
necessary.
•
Motor fixation before operation:
The motor must be mounted rigidly before operation. The magnetic
bearing is not designed for movement of the fan during operation. Any movement (especially tilting) of
the fan during rotation may lead to a touch-down of the magnetic bearing with potential mechanical
damage to the system.
•
Motor fixation, resonances:
It should be avoided that the mounting construction can resonate with
the motor. Such resonances will lead to excessive motor currents, heat-up of the system and may lead
to malfunction of the magnetic bearing.
•
Mounting holes:
The fan can be mounted with four M10 screws on the inlet flange and four M10
screws on the outlet flange. (see
•
Cable bending radius:
Minimum cable bending radius according to
must be ensured.