Include Dimmers/Switches
Pressing the center button
to select
Include Dim/Swch
will bring you to the
INCLUDE
DIM/SwCH
screen and put the
RZCPG into Inclusion Mode.
You will be prompted to press a
button on your Dimmer, Switch or
Plug-In Module. These devices
require a simple one step process (button press) to
include into the network
(refer to individual device
instruction sheet)
. Once the button is pressed on
your Dimmer, Switch or Plug-In Module, the RZCPG
will go through a communication process and assign
the node information for that device. The
TEXT
EDITOR
will display. You can now name your device.
NOTE:
The RZCPG is by default assigned #1.
Using
TEXT EDITOR
you can
either assign a name from a list
of templates or assign a unique
name to your device.
NOTE:
The right soft key will
toggle from
Template
to
Abc
to
ABC
to
abc
to
123
and back to
Template
again. This feature allows you to access
the template names or to select capital/undercase
letters and numerals to name your device.
To use the pre-made Templates,
with
Template
displayed, use the
up and down arrow buttons
to select a name. The RZCPG
offers a list of over 100 commonly
used names to choose from.
NOTE:
The template names are
editable for customization if you
choose to alter them.
STEP 1
x1
Cancel
INCLUDE DIM/SWCH
Press button on
Dimmer/Switch
x1
TEXT EDITOR
Switch #2
Levito
Save? Press
n
Switch #2
Template
TEXT EDITOR
x1
TEXT EDITOR
Switch #2
Leviton
Bedroom
Abc
Save? Press
6
Using your RZCPG, follow these steps to set up
your ViziaRf
TM
network:
1
ON
2
ON
3
ON
4
ON
OFF
OFF
OFF
OFF
x1
12:00 PM
Mon 05.01.200 6
Default Pr ofil e
Stand By
Menu
1
ON
2
ON
3
ON
4
ON
OFF
OFF
OFF
OFF
x1
12:00 PM
Mon 05.01.200 6
Default Pr ofil e
Stand By
Menu
