TOPAZ 12 WALL PACK
INSTALLATION INSTRUCTIONS
The TOPAZ 12 Wall Packs are easy-to-install front-wired electrical distribution panels and are connected similarly to a circuit breaker panel. These instructions will
tell you how to mount, wire, assemble, test and maintain TOPAZ 12 Wall Packs. The instructions in this manual are provided in the order of installation.
Step 1 - Unpack pack(s)
In each pack box you will find one TOPAZ 12 Wall Pack, two keys, and one installation manual (this document). Dimmer and control modules are shipped separate.
Leave control module and dimmer modules in their packing and store in clean, dry place until ready to perform Step 10.
After unpacking, please inspect the pack for any possible shipping damage. Document any shipping damage and contact the freight company and Leviton.
Step 2 - Mount pack(s)
Packs must have 6" (152mm) minimum clearance above fan and 36" (914mm) minimum clearance in front for proper cooling and access. Packs should be located in
a clean, dust free environment, within proper operating temperature range. See Specifications - Table IV, pg 10.
One pack per location:
Note:
If you have a multiple pack or semi-recessed installation, skip ahead to the appropriate section for instructions.
• Locate stud or a secure framing member in wall where pack is to be mounted.
• Using the dimensions shown in Figure 1 mark location of one column of 2 mounting holes on wall over stud.
• Fasten pack to wall with appropriate fasteners.
Note:
Fully-loaded pack weighs 40 pounds (18.2 Kg.), not including wire weight.
Figure 1 - Surface Mounting Dimensions
Two packs mounted together:
•
Locate two studs or secure framing members on 16” (406mm) centers in wall where packs are to be mounted.
Note:
If appropriately spaced studs or framing members cannot be located, packs may have to be mounted on Unistrut or equivalent supporting channels.
Skip ahead to the next section for instructions.
Using the dimensions shown in Figure 1 mark location of one column of 2 mounting holes on wall over each stud.
Page I
