6
Figure 5
Wetguard™ Accessory Seal Replacement
EDSR DEVICE OPERATION
To use, turn EDSR switch to the OFF position. Raise Receptacle Cover and insert mating plug. Refer
to Ratings chart
(page 7)
for the list of mating configurations. The EDSR will work with all 20A and 30A
NEMA Configurations. For an environmental rating of IP66 "while-in-use", a Leviton
WETGUARD
TM
plug
must be used.
*Gasket Clamp (20A)
Rubber Gasket (20A)
Environmental
Rating Label
EDSR
“V” Ribs
Mounting
Screws (4)
Gasket-Clamp
Assembly
* 30A Rubber Gasket and Gasket Clamp are pre-installed with EDSR.
Содержание PowerSwitch EDSR
Страница 11: ...NOTES ...