manualshive.com logo in svg

Leviton PICCOLO SCAN, Руководство пользователя

Поделиться
Скачать
Leviton PICCOLO SCAN Скачать руководство пользователя страница 49

Patching 

 

 

43

18. Patching  

18.1. Patching Dimmers 

The console’s channels are associated (patched) to the dimmer outputs of the DMX line. Channel to 

dimmer patching is performed in the dimmer patch table.  

 

 

To open the dimmer patch table, press [CHANNEL][CHANNEL] or 

[MENU][0][2].  

 

The dimmer patch table displays a list with all dimmer addresses 

(Dmx) in numerical order. Each dimmer has a limit value (Li), a 

response curve (Cu) and an associated channel (Cha). See Dimmer 

Patch Table Options below for more information. 

 

 

To patch a channel to a dimmer, place cursor in Cha column, then press [#][ENTER].  

 

 A channel can control as many dimmers as needed. Note that a dimmer can only be controlled by 

a single channel.  

 

Dimmer Patch Table Options: 

 

Dmx  List of dimmer addresses (list is not editable). The list functions as the table index and is used for locating 

dimmer addresses within the table.  

 

For example, to view dimmer 48, place cursor in Dmx column, then press [48][ENTER]. 

 

Li 

Value of the limit function. The dimmer output level will never be higher than this level. If the limit is FF 

(100%), the dimmer will be controlled in full range (0-100).  

 

To edit limit level, place cursor in Li column, then press [#][ENTER]. 

 

Cu 

Response curve of the dimmer.  

 

To set curve, place cursor in Cu column and select curve type (see pre-programmed curves below).  

 

Cha 

Channel number that is patched to the dimmer address.  

 

To edit channel to dimmer assignment, place cursor in Cha column, then press [#][ENTER]. 

 

Fxt 

Indicates the number of an assigned fixture that requires an external dimmer. See “dm” in Fixture Patch 

Table Options below. 

 

SM.D  Indicates that the dimmer controls house lights. See House Light Dimmers below. 

 

18.1.1. Testing Dimmers  

 

To test a dimmer in the dimmer patch table, select a dimmer (Dmx) or limit cell (Li) with cursor, press 

[TEST] and turn the encoder wheel.  

 

 

To capture the test level as a limit value, select (Li) then press [INSERT]. 

 

 

To cancel the test function, press [C] or [EXIT]. 

 

 

 

 

 

Содержание PICCOLO SCAN











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды