Leviton MC24/48, Руководство пользователя

Страница: 94 / 294

Colortran Encore Control Console
Software Version 3.05
80
Keypad Commands
In the Multi-Scene mode, channel levels are entered and recorded through the
Command Line by using the Data Entry Keypad. When a number is entered
into the Command Line, the console automatically assumes by default that
channels are being addressed (there is no channel key). The [DIMMER] key is
available to directly control individual dimmers, and for use in patching
commands.
?
B
ASIC
R
ULE
:
There is no “channel” key; when you enter a number
in the Command Line by pressing the key, the console automatically assumes
that the number is a channel number.
?
E
XAMPLE
:
To set channel 2 to a level of 75%:
[2] [@] [75] [ENTER] (“Channels 2 @ 75%” appears in
the Command Line.)
?
A
DVANCED
T
OPICS
:
See the Dimmer Check topic in Chapter 12,
Utilities, Warnings, Printing, And Default Settings .
You do not need to enter a zero when you specify a level that is a multiple of
ten. If you enter [5], the console assumes you mean 50%; if you enter [8], the
console assumes you mean 80%; etc.
?
E
XAMPLE
:
To set channel 2 to a level of 70%:
[2] [@] [7] [ENTER] ("Channels 2 @ 70% " appears in
the Command Line.)
Channel Lists
You can use the AND [+], THRU [>], and MINUS [-] keys to make lists of
channels and other items. You are not required to enter the list in any
particular order. You can generally just enter channel lists in the order in
which you might be thinking of them.
?
E
XAMPLE
:
If you enter key strokes as follows:
[12] [>] [24] [+] [36] [-] [23] [>] [13] [@] [FULL] [ENTER]
"Channels 12 > 24 + 36 - 23 > 13 @ Full" appears in the Command Line.
Since only channels 12, 24, and 36 are set to Full level by the command, it
would have been easier to enter: