Leviton MC24/48, Руководство пользователя

Страница: 80 / 294

Colortran Encore Control Console
Software Version 3.05
66
Playback Fader Clearing Modes
You can use the (FADER CLEAR) soft key in the System Setup to toggle the
Playback Fader Clearing mode between Automatic and Manual. If the Fader
Clearing mode is Automatic, the cues unload from the playback faders as they
finish. If the Fader Clearing mode is Manual, all fades do not clear from the
faders when they finish. Rather, the fades remain on the faders until the
playback fader Take Control button is pressed. Timed cues fade in their
prescribed time, but will become manual when they are complete, allowing you
to move the fader to the top of its travel to "grab" the fade and reverse its
direction manually. In either Fader Clearing mode, cues may be loaded to
faders with the GO button or the [LOAD] key.
?
H
INT
:
In normal theatrical applications, the Automatic Fader
Clearing mode is usually used.
?
E
XAMPLE
:
To toggle the Fader Clearing mode in the Setup display:
1. (SYSTM SETUP)
2. (FADER CLEAR) (Pressing [ENTER] is not
necessary.)
?
A
DVANCED
T
OPIC
:
See the topic on Clearing Fades From The
Playback Faders in Chapter 9, Playing Back Cues .