Leviton MC24/48, Руководство пользователя

Страница: 31 / 294

Chapter 2: Basic Console Conventions
Software Version 3.05
17
The commands you enter into the console appear in the Command Line. The
Command Line is visible near the bottom of the monitor screen, just above the
soft keys. (See Figure 2.3.) A command is entered by pressing a sequence of
different soft keys and hard keys. Every keystroke you make appears on the
Command Line, creating a "sentence" that becomes a command for the console.
Your command is then completed by pressing the [ENTER] key, at which time
the console executes the command.
?
E
XAMPLE
:
A command to set channel 7 at a level of 75 percent
is:
[7] [@] [75] [ENTER] (Command Line History
shows "Channel 7 @ 75")
?
B
ASIC
R
ULE
:
There is no channel key, therefore anytime a number
is entered at the beginning of the Command Line, "Channel" is automatically
entered onto the Command Line. Use the At [@] key to signify a channel level
or patching assignment. The [@] key can be roughly translated as "at the
level of" or "patched to".
?
B
ASIC
R
ULE
:
Before you execute a command by pressing the
[ENTER] key, you can use the [CLEAR] key to erase keystrokes in the
Command Line. The keystroke immediately to the left of the cursor is erased
from the Command Line when the [CLEAR] key is pressed. You can also use
the Left and Right Arrow keys on the Position Keypad to move the cursor
around in the Command Line.
Command Line History
After pressing the [ENTER] key in the Example above, you will notice that
your command "sentence" moves up one line on the display, and appears in
gray text. The entered command is now in the position on the screen called the
Command Line History. The Command Line History provides you with a copy
of the last command that was entered. You cannot manipulate the information
in the Command Line History; it just shows what command you last entered.