Leviton MC24/48, Руководство пользователя

Страница: 269 / 294

Appendix D: MIDI Interface
Software Version 3.05
D-3
When using MSC messages, you can assign each device an individual
identification number from 0 - 111. Only MIDI Show Control Messages will
be supported if you choose a device number greater than 16.
Using Standard MIDI Messages
The Encore recognizes a selected set of standard MIDI incoming messages that
correspond to pre-determined lighting control parameters. These incoming
messages allow you direct MIDI control of Encore submaster levels and
channel levels, as well as selection and triggering of cues and macros.
Certain Encore controls and commands transmit pre-determined MIDI
messages. These outgoing messages allow you direct MIDI control of notes
and velocities via the submaster Bump buttons and the submaster faders.
(Sequence control commands such as Go and Stop are not transmitted as
standard MIDI messages, but are transmitted in MSC format only.)
Standard MIDI commands include data messages and general system messages.
Data messages must include a destination MIDI channel number from 1 - 16,
whereas system messages are transmitted to all MIDI channels regardless of
which channel originated the message. If you set the Encore device number
above 16, no standard MIDI data messages can be sent or received, and only
MIDI system messages and MSC commands are recognized.
?
N
OTE
:
In lighting control terminology, the term "channel" refers to
a control output. In MIDI terminology, "channel" is the device address. In
this appendix, the MIDI device address is referred to as the "MIDI channel".
The single word "channel" refers to an Encore control output.
Sub#
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
MIDI
Note #
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
Musical
Note
C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3
Sub# 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
MIDI
Note # 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
Musical
Note C4 D4 E4 F4 G4 A4 B4 C5 D5 E5 F5 G5 A5
Table D-1, Submaster-to-MIDI Note Number Mapping*
*Note that submasters 25 - 48 only apply to Encore 48/96, XL, and XL/2
models.
Transmission Of Standard MIDI Messages.
Each of the
Encore submasters corresponds to an individual MIDI note number, beginning
with MIDI note number 14. (See Table D-1.) Note that the lowest musical