LevelOne WUS-3200, Руководство пользователя

Страница: 10 / 105

7
Chapter3 Basic Installation
3.1 Connecting the Hardware
1. Make sure that your USB devices are switched off and that the MFP
server’s Power Adapter is disconnected.
2. Connect the USB devices to the USB ports using the USB cables.
3. Connect the MFP server to the network using a twisted pair category 5
cable, 10baseT or 100baseTX (after the wireless parameters are set
correctly, that cable should be removed to let wireless station mode
work).
After the wireless parameters are set correctly, that cable should be
removed to let wireless station mode work. However, LAN access is still
referable, and can work together with wireless ad-hoc mode.
4. Turn on the USB devices and make sure it is ready for use.
5. Connect the Power Adapter to the server. The power indicator will light
up and USB1 and USB2 indicators will flash in turn. When the Link
indicator lights up, the server is correctly connected to the network.
When USB1 and USB2 indicators do not flash, the server starts to work
normally.
6. If you connected USB HP printers to server, please press the Init
button for 3 seconds on the server once to print a page of server
configuration report.
3.2 Wireless connection
3.2.1 Preliminary
Before you can access wireless network, wireless parameters should
be set correctly. You
have to setup the first wireless parameter set
through LAN connection.
Wireless access can be set as 1. Infrastructure (station) mode, which
need an access point to route network messages, or 2. Ad-hoc mode,
which connect nearby wireless PC/devices with the same SSID
(Service Set ID).
Wireless access can be secured by WEP64, WEP128, or
WPA-PSK/TKIP.
In infrastructure mode, if network administrator wants to change any
security related parameters, WUS-3200
should be changed first,