LevelOne WGR-8031 Скачать руководство пользователя страница 325

Страница: 325 / 331

325

sole purpose of protecting the integrity of the free software

distribution system, which is implemented by public

license practices. Many people have made generous

contributions to the wide range of software distributed

through that system in reliance on consistent application of

that system; it is up to the author/donor to decide if he or

she is willing to distribute software through any other

system and a licensee cannot impose that choice.

This section is intended to make thoroughly clear what is

believed to be a consequence of the rest of this License.

If the distribution and/or use of the Program is restricted

in certain countries either by patents or by copyrighted

interfaces, the original copyright holder who places the

Program under this License may add an explicit

geographical distribution limitation excluding those

countries, so that distribution is permitted only in or among

countries not thus excluded. In such case, this License

incorporates the limitation as if written in the body of this

License.

Содержание WGR-8031












































































































































































































































































































































Результаты поиска

Содержание WGR-8031

Отзывы:

LevelOne WGR-8031, Руководство пользователя, Страница: 325 / 331

Результаты поиска

Содержание WGR-8031

Отзывы: